Hi-Build Artwork Resin is a high viscosity, two part artwork resin that offers the benefits of 3D height. This resin is the thickest, most gloopy and controllable available on the market and is perfect for Blob Art, Dot Art, Geode Art & doming.
by volume: 100 parts resin to 100 parts hardener
by weight: 100 parts resin to 90 parts hardener
Surfaces
canvas, wood, MDF & glass
Curing time
second layer after 20 minutes, touch dry in 2-3 hours at 23°C, full cure in 4-5 days
Coverage
1 litre of the mixed product will cover approx. 1.43 m²@ 0.5 mm thick (1kg = 1 litre)
Pot Life
15-20 minutes at 23°C (250g mixed mass)
Shelf life
one year in sealed containers
Hi-Build Artwork Resin non-hazardous and non-toxic, it utilises the most up to date UV inhibitors/blockers.
It is a two part epoxy resin which will work well in any application where the user wants the resin to stay exactly where it is dropped; no slumping, no sliding, no movement, it stays where you drop it. Simply mix in a 1:1 ratio and let it drip, drop or ooze off your spatula. This resin is not available in a clear option, by default it is an off white colour and therefore Hi-Build must be pigmented. Use a suitable resin pigment e.g resi-TINT, resi-TINT MAX, resi-METAL (or equivalent)
Perfect for Blob art, 3D collage work & Geode art
No slumping or sliding
Available in 3 pack sizes
Solvent free and odour free
User friendly 1:1 mix ratio
High build formula
Non-flammable
For more information please see Product Documents…
The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the resin not drying properly and lower mechanical properties.
The mixed components should be thoroughly stirred for 3-4 minutes to ensure an even consistency, add the mixed resin to individual cups and add your chosen pigments to each cup.
Application
The product can then be dropped onto the surface to create domed 3D shapes. Apply by hand, if it’s too gloopy to measure properly simply pre-warm the containers (place in hot water to lower the viscosity).
BUBBLES: Any bubbles created by hand mixing can be easily popped by using a sharp object or by passing warm air over the surface of the resin with a blowtorch or hot air dryer on slow speed settings. Do not hold closer than 30cm to your artwork otherwise you risk creating ripples and dimples in the resin finish. If you use alcohol inks DO NOT use a flame to remove the bubbles, as alcohol is flammable.
Health & Safety
Although our resins are formulated with the most modern and safest epoxy chemicals available, all epoxy resins are chemicals and should be managed and handled with proactive safety hygiene and responsible care.
Always wear nitrile gloves (or use a specialist resin barrier cream)
Wear a respirator when sanding partially cured resin
It is advisable to work in a well ventilated room
We advise the use of safety goggles
Avoid skin contact (if resin gets on skin wash with plenty of soap & water)
DO NOT eat, drink or smoke while working
In case of eye contamination wash with plenty of water for 15 minutes and consult medical advice immediately
Adding inks/paints/mica powder/glitter to epoxy resin will change its properties and may reduce its non-toxicity. If you use alcohol inks DO NOT use a flame to remove bubbles, as alcohol is flammable.
€18.57 – €241.69 ex. VATSelect options
This product has multiple variants. The options may be chosen on the product page
All Ireland Shipping
Republic of Ireland and Northern Ireland.
Excellent Customer Service
Proven track record in attending to customers orders efficiently.
Unbeatable Service
Its simple – you order – we deliver!
Secure Stripe Checkout
PayPal / MasterCard / Visa
Manage Cookie Consent
We use cookies to optimize our website and our service.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
