IMPORTANT – READ BEFORE USE: Over-saturation, caused by using more liquid than the recommended amount per square metre, will leave the surface wet and un-bonded. For best results, read our application guide which is available through the QR code on the bottle.
It is important you apply Easihold in the right weather conditions. Warm weather and most importantly, dry conditions for the 48 hours after application will give you optimal performance from your Easihold binder.
Easihold is a water based, air drying product. As the water evaporates, our patented Easihold particles crosslink to bond and stabilise your stones!
’s very important Easihold is able to carry out this evaporation process to gain its strength. When this doesn’t happen – for example in cold conditions or if you have applied too much Easihold and the stones are over saturated; the crosslinking process will not occur, and the final result will be compromised.
The stones you use don’t have to be dry upon purchase, but we do recommend washing and letting them dry before use, as some new stones can arrive with a silty deposit.
Contamination like this will prevent a strong bond being achieved between your stones. If you’re using existing stones, try to remove any dirt or debris prior to application, and leave them to dry before applying Easihold.
There are two important factors for a suitable base for Easihold. Firstly, the base has to be stable enough to support the traffic it is to receive. And secondly, the base should be free draining.
Easihold is a water-based product and will start to break down if left submerged underwater for long periods of time.
