Please note, we are closed this Friday 17th April and Monday 20th April . We reopen 9am on Tuesday 21st April. Thank you for your understanding.
Vuba Resin Bound – Oil and Grease Cleaner
€86.10€70.00 incl. VAT
Vuba Oil and Grease Surface Cleaner is a powerful, ready to use cleaning solution formulated to break down and remove oil-based contaminants from resin-bound surfaces. It is ideal
for restoring driveways, patios, and paths affected by stubborn fluid and chemical stains.
EFFECTIVELY TARGETS
• Oil stains
• Engine coolant spills
• Brake fluid residue
• Other hard-to-remove automotive or mechanical contaminants
BOTTLE SIZE: 5L COVERAGE RATE: 40 – 50m²
* Coverage may vary depending on surface porosity and
level of soiling.
Out of stock
Key Information
- Usability: Temperature: 5–40 °C
- Environmental Conditions: Not recommended to apply in strong winds. Surface must be free of rubbish, debris, and obstructions to allow effective cleaning.
- Coats: If stains remain, apply a second coat once the first coat has been applied and thoroughly rinsed.
- Usage Time: Don’t leave product to sit for longer than 5 minutes
- Storage: Store in a cool, dry place away from direct sunlight. Ensure container is tightly sealed after use.
- Shelf Life: 12 months from date of manufacture when stored correctly.
Benefits
- Fast-Acting & Ready to use Formula
- Ideal for Common Automotive Leaks and Spills
- No Mixing or Dilution Required
- Prepares Surfaces for Sealing or Ongoing Maintenance
Instructions
PREPARATION:
- Always test a small, inconspicuous area before full application.
APPLICATION:
- Use straight from the container.
- Apply using a pump-action pressure sprayer or watering can.
- Alternatively, decant your Vuba Surface Cleaner into a wide bucket or container that fits your brush and then apply directly with the brush.
DWELL TIME
- Allow the product to work for 2–5 minutes.
AGITATION:
- Lightly scrub stubborn stains with a broom or brush if necessary.
RINSING:
- Rinse thoroughly with clean water.
REPEAT:
- If stains persist, repeat the procedure.
FINSHING:
- For best results, power wash the surface after treatment
to remove all residue.
