Christmas Holidays Closure - We are closed from Friday 20th December, reopening on the Monday 6th January 2025. Last orders will be dispatched Thursday 19th December.
Any orders placed during this time will be dispatched from Monday 6th January
Epoxy Bund and Bilge Coat – Exceptional Chemical Resistance – 5kg
€105.69 ex. VAT
Bund Coat is a two-part epoxy resin coating designed for the protection of bund areas in the event of spillage, it can be applied internally or externally for a finish resistant to water, oil, diesel and a variety of chemicals.
- Excellent resistance to petrol, diesel, acids, alkalis and solvents
- Fills cracks between bund wall and floor
- Flexible waterproof coating
- Can be applied to damp surfaces
- Great for bilge areas, bulkheads and lockers on boats
100% solids epoxy resin bund sealer with exceptional chemical resistance, ideal for coating areas which need to be watertight in case of tank or pipe failure
Bund Coat is a two-part epoxy resin coating designed for the protection of bund areas in the event of spillage, it can be applied internally or externally for a finish resistant to water, oil, diesel and a variety of chemicals.
- Excellent resistance to petrol, diesel, acids, alkalis and solvents
- Fills cracks between bund wall and floor
- Flexible waterproof coating
- Can be applied to damp surfaces
For more information please see Product Documents…
Instructions
Specifications
|
| Surfaces |
concrete, brick or blockwork |
| Interior/Exterior |
interior & exterior |
| Curing time |
at 20°C the area can be opened to light traffic after 24 hours, full cure in 5 – 7 days |
| Coverage |
5kg of the mixed product will cover 15-20m² |
| Pot Life |
40 minutes |
| Shelf life |
one year in sealed containers |
Surface Preparation
All surfaces should be clean, dry and free from any contaminants and surface laitance. Remove grease and oil using Bio-Clean Degreaser. Previously painted surfaces should be sound. Any loose, flaking paint should be removed prior to application.
Mixing
Empty the smaller container into the larger container and mix thoroughly. Part mixing is not normally recommended (speak to the technical department if this is required). Use an electric drill and mixing blade to stir. If electric drill is unavailable use a wide bladed tool and mix thoroughly for several minutes. In all cases ensure that the sides and base are scrapped to incorporate all the mixture.
Application
Apply by brush working well into the substrate. Apply thickly over any minor cracks and joints. One coat is generally sufficient to produce a watertight seal. A second coat may be required over porous or rough surfaces in order to produce a continuous coat.
