Sil-Poxy™ - Silicone Adhesive
EpoxAcast™ 690 - Optically Clear Casting Epoxy EpoxAcast™ 690 - Optically Clear Casting Epoxy €39.00 €145.00Price range: €47.97€39.00 through €178.35€145.00 incl. VAT
You save (%)
Body Double™ SILK - Trial kit (770g) Body Double™ SILK - Trial kit (770g) €54.12€44.00 incl. VAT

Sil-Poxy™ – Silicone Adhesive

€14.50 €39.00Price range: €17.84€14.50 through €47.97€39.00 incl. VAT
You save (%)

Sil-Poxy™ is a one component adhesive made specifically for bonding Smooth-On RTV moldmaking silicone rubbers to silicone rubber and other substrates including some plastics (urethane), plasters/ceramics, fabrics, etc.
Sil-Poxy™ will work with Smooth-On tin or platinum cure moldmaking silicones and provides a strong, flexible bond between silicone parts with high elongation. Can be colored with Silc-Pig™ silicone pigments. Cured adhesive resists weathering, moisture, UV and high temperatures. Sil-Poxy™ can be used for repairing torn silicone rubber molds. Other applications include bonding silicone for prosthetics and animatronics.

Cured Sil-Poxy™ is certified skin safe. IMPORTANT – Do not apply to skin in liquid form.

Features

  • Can be used repairing torn silicone rubber molds.
  • Will work with tin- or platinum-cure silicones
  • Provides a strong, flexible bond

All Ireland Shipping

Specification Value
Pot Life 5 minutes
Handling Time 1 hour
Cure Time 24 hours
Shore Hardness 40 A
Specific Gravity 1.12 g/cc (1.12 g/cm³)
Color Translucent
Tensile Strength 750 psi
Elongation @ Break 750%
Useful Temperature (min) -50°F (-46°C)
Useful Temperature (max) 500°F (260°C)
Mixed Viscosity Thick Paste

Instructions

Safety – Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.

A clean, dry surface is essential for successful adhesive bonding. If possible, abrade surface and follow with solvent wipe before applying.

Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

Dispensing – Squeeze tube, taking care not allow air to enter tube before replacing cap. Unused product in tube exposed to air will cure quickly.

Applying – Apply adhesive to surface and mate parts. Material will begin to cure in 15 minutes. Pieces can be handled after 1 hour. Full cure is attained after 24 hours. Warmer temperatures (and higher humidity) will result in a faster cure. Lower temperature will retard cure.

Product Documents

Product Documents

Downloads

SKU: N/A Categories: , , , , , , , , , , , ,

Related products